Electrical faults are one of the leading causes of power disruptions, equipment failure, and even fire hazards in homes and commercial properties. At Niceic Electricians, our team of certified professionals handles fault finding with precision, ensuring your system is safe, compliant, and reliable.
Below, we’ll walk you through how our experts carry out fault finding across London properties – whether you're experiencing flickering lights, tripped fuses, or a total power outage.
Step 1: Initial Assessment and Safety First
Before any testing begins, our electricians start by gathering information. We ask you about the nature of the fault – what appliances are affected, when the problem occurs, and any previous electrical issues.
Then, we isolate the circuit to ensure safety. This often involves turning off the main switch or removing individual fuses to avoid electrical hazards during testing.
Step 2: Visual Inspection
The next phase is a visual inspection of the wiring, sockets, switches, fuse boards, and light fittings. Burn marks, exposed wires, or damaged components can often point us in the right direction without invasive testing.
We also ensure that the installation complies with the current BS 7671 wiring regulations.
Step 3: Continuity Testing
Using specialised testers, our electricians carry out continuity tests to check whether current can flow freely through the circuit. This helps identify breaks or loose connections in the wiring.
We use insulated tools and calibrated equipment to verify circuit integrity before reconnecting any supply.
Step 4: Insulation Resistance Testing
Insulation resistance testing checks the quality of the insulation surrounding wires. Low resistance could indicate moisture damage, deteriorated insulation, or damaged cables, all of which pose risks of shock or fire.
This is particularly important in older London homes where wiring may not meet modern standards.
Step 5: Earth Fault Loop Impedance Test
We perform an earth loop test to confirm that, in the event of a fault, the circuit can safely trip the protective device. If the impedance is too high, the protective device may fail to operate, which is a serious risk.
This helps ensure that your fuse board or consumer unit can respond correctly to any future faults.
Step 6: Diagnosis and Repair
Based on test results, our team identifies the precise cause of the fault. Common issues include:
-
Damaged cable insulation
-
Overloaded circuits
-
Loose connections
-
Faulty appliances
-
Water ingress in sockets
Once identified, we repair or replace the faulty component in accordance with NICEIC safety standards. If needed, we can rewire sections or install new protection devices.
Step 7: Final Testing and Certification
After repairs, we re-test the system to ensure everything is operating safely. You’ll receive a fault-finding report, and for larger jobs, a Minor Electrical Installation Works Certificate.
We’ll also offer professional advice on preventive maintenance and future upgrades.
Why Choose Niceic Electricians for Fault Finding?
Niceic Electricians are fully NICEIC certified, meaning we meet the strictest technical and safety standards in the UK. Our engineers are trained, insured, and experienced in domestic and commercial electrical fault diagnosis.
We proudly serve homes and businesses across London with prompt response, transparent pricing, and clear communication from start to finish.
Contact us today on 02034882928 or email info@rcdelectrician.co.uk.